Specifications - Astronaut

Astronaut CL

Electrical

Signal Connections
3 input jacks, 3.5 mm, mono-stereo with auto detection and mix-down

Input Impedance
62k ohms

Amplifier/Power Requirements
40W TSP
15 VDC, 15W

Power Supply/Requirements
Part # FW-PSE1515W (Wall Mount) or FW-PSE1515D (Desktop)
Switch mode, low noise, high efficiency wall or desktop style
Voltage input: 100-240 V, 50/60 Hz
Voltage output: 15 VDC

85% efficient
Fuse and over-temp protection (80 degrees centigrade)
Regulation +/-5%
Ripple and noise less than 1%
Overload and over-voltage protection
Short circuit protection with auto-recovery
CEC Level IV compliant
< 0.25W stand-by power consumption
Approvals: UL, cUL, TUV, PSE, CSA, CCC, BEAB

Acoustics

Omnidirectional horn with ceiling acoustic coupling (patented)
Magnetically shielded custom Audiophile® transducer (patented)
Custom tuned cabinet (patent applied for)
Custom tuned port

Performance

Frequency Response
70-15kHz @ -3 dB
Signal to Noise Ratio
> 90 db

Loudness
87 dB

Port Tuning
90 Hz

Mechanical

System Dimensions
Diameter—7.2" Height—3.5"

System Weight
17.5 ounces (.5 kg)

Power Supply Dimensions
Wall Mount and Desktop— 4.33" x 2.07" x 1.44"

Power Supply Weight
Wall Mount and Desktop—8 ounces
AC cord (if needed)—8 ounces

Power Cord

Standard CEC certified wall mount power supply—
6' reach with tuning fork barrel connector
Optional CEC certified desktop style power supply—AC power cord and attached output cord with tuning fork barrel connector
AC input style plug IEC-320, C-8

Warranty

Full two years on all components

Astronaut XL